Network appliance and hard-coded passwords
Tuesday, August 26. 2014
Trend Micro reported that they found a backdoor from Netis/Netcore firmware. It is a quite serious one allowing remote code execution from the Internet side. Sure, the backdoor is "protected" by a password. As you may expect, the password is hard-coded, cannot be changed and is exactly same in each unit. Nice "security", huh! 
Why doesn't this surprise me? Mr. Ronkainen, who is a really keen B593 hacker did find the Huawei internal documentation (available from the entire Internet, of course) Log_Capturing_Guide_of_LTE_CPE_B593_V1.2.docx. It describes following "Step 5 Enter admin after Login and press Enter. Then enter the password -removed- and press Enter". Actually, according to Mr. Ronkainen, the same password is the hard-coded password of serial-console. In reality, some soldering is required for serial console to work, but if you do ... there goes your security.
All B593 hacking always reveals hard-coded encryption keys and passwords. My conclusion: that poor security in these produced-as-cheaply-as-possible devices is by design, and it cannot be changed. Not too many samples in my "research", though. I don't mind having fixed default passwords, you can go and change them. These Chinese units, have fixed passwords, which is yet another story.
Again, I thank Mr. Ronkainen for sharing his findings. Even website https://www.sec-consult.com/ crredits him for his findings in SEC Consult Vulnerability Lab Security Advisory < 20140122-0 >.
